How to unlock any Iphone device

It's quite simple to perform the necessary steps: cut, attach and insert.

Viola: All ready to be used.

What you need: SIM card, Unlock chip / Turbo Sim, scissor, paper clip, pencil and the iPhone

1) Take out the chip and SIM card to have them side by side

2) Place the chip below the SIM card in a certain way so it matches and merges perfectly (the side with the diagonal slant must be correctly placed)

3) You can now see that the little rectangular black is raised up from the chip

4) What you need to do is to cut a portion of your SIM card so the black rectangle is on level with the SIM card

5) The chip has a slight adhesive attachment to connect to the SIM card below the brown removable layer

6) Cut your SIM card accordingly to the same size as the layout- you may use a pencil to mark the appropriate cut

7) Attach the SIM and chip perfectly after you remove the brown layer- make sure it’s not crooked and line it up correctly

8) Unbend a paper clip to insert to the top side of the iPhone where the hole is located- press it inside

9) The SIM card holder slot should open up, which you can take out

10) Insert the attachment accordingly so it fits inside the slot (the little triangle will replace the missing area on the diagonal)

11) Insert them back into the slot (REMEMBER that it is facing upside down)- Make sure it goes in correctly

12) Turn on the iPhone and all work is done!

You now have yourself an unlocked iPhone! Enjoy!!

*Please note that the turbo sim will work with iPhone version 1.12 !!!