How to
unlock any Iphone device
It's quite simple to
perform the necessary steps: cut, attach and insert.
Viola: All ready to be
used.
What you need: SIM card,
Unlock chip / Turbo Sim, scissor, paper clip, pencil and the iPhone
1) Take out the chip and
SIM card to have them side by side
2) Place the chip below
the SIM card in a certain way so it matches and merges perfectly (the side with
the diagonal slant must be correctly placed)
3) You can now see that
the little rectangular black is raised up from the chip
4) What you need to do
is to cut a portion of your SIM card so the black rectangle is on level with the
SIM card
5) The chip has a slight
adhesive attachment to connect to the SIM card below the brown removable layer
6) Cut your SIM card
accordingly to the same size as the layout- you may use a pencil to mark the
appropriate cut
7) Attach the SIM and
chip perfectly after you remove the brown layer- make sure it’s not crooked and
line it up correctly
8) Unbend a paper clip
to insert to the top side of the iPhone where the hole is located- press it
inside
9) The SIM card holder
slot should open up, which you can take out
10) Insert the
attachment accordingly so it fits inside the slot (the little triangle will
replace the missing area on the diagonal)
11) Insert them back
into the slot (REMEMBER that it is facing upside down)- Make sure it goes in
correctly
12) Turn on the iPhone
and all work is done!
You now have yourself
an unlocked iPhone! Enjoy!!
*Please note that the
turbo sim will work with iPhone version 1.12 !!!
